HOME > Products > Solar & Wind > GT Series 2000W~10000W > PM-10000GT



   


 
 
 
 
 
 

Character:
Two built-in Independent MPPT Boosters increase overall efficiency
Convectional Cooling System provided to guarantee quiet operation
Compact Size, Light Weight
Up to 95% high conversion efficiency
Advanced DSP Control Technology delivers accurate data
Ease of Installation to Save Time and Money
Mimic LCD Display
IP65 Cabinets for both Indoor and Outdoor Applications
Optional Monitoring Software provided to offer operational status and electricity generated data

Description:
 The GT series grid-connected Photovoltaic Inverter is delivered in a waterproof IP65 enclosure which can be installed in either a grid connected solar tracker system or a stationary PV system. By taking care of an accurate power conversion from solar panel to local grid, the GT series effects conversion process with minimal power loss and maximum reliability.

Specifications:
Model Item
PM-10000GT
Inverter
Technology
Conversion Mode
Sine-wave, Current source, High frequency PWM
Isolation Method
Transformer-less Design *
DC Input Data
  
Nominal DC Voltage
740 VDC
Max. DC input Voltage
1000 VDC
Working range
300VDC~1000VDC **
Max DC input current (Each MPPT Tracker)
28.6 Amp
MPPT Range
370 VDC ~ 850 VDC
MPPT Tracker
2
AC Output Data
  
Nominal AC Power
10000W
Max. AC Power
11000VA
Nominal AC Voltage
AC 230V x 3
Output Connect Method
3-Phase / 4-Wires (L1, L2, L3, N, PE)
AC Voltage Rang
184~264.5Vac(Base on 230 Vac)
Nominal AC Current
43.47Amp
Frequency
50/60Hz Auto-Selection (47.5 ~ 51.5 Hz or 59.3 ~ 60.5 Hz)
Power Factor
COS PHI 0.8-1.0
Current Distortion
Total Harmonic current : Less than 5%
Single Harmonic current : Less than 3%
Efficiency Data
  
Max. efficiency
>97.5%
Euro efficiency
>97.0%
CEC efficiency
>97.0%
Environmental
  
Operating Temperature
-20 °C ~ + 60 °C
-4 °F ~ 139 °F
Humidity
0 to 100%(Without condensation)
Altitude
0 ~ 2000 M / 0 ~ 6600 ft
Mechanical
  
Dimensions
(H x W x D in mm )
  
Weight (Kgs / Lbs)
  
Protection Class
IP65, outdoor
Cooling
Fan-cooled
AC Connector
Connector
DC Connector
Connector
Communication
  
Communication Interface
RS232
USB, RS485, Dry contact, TCP/IP
Front Panel
  
LCD
Boost input Voltage/Boost input Current/Boost input Power/AC output Voltage /AC output frequency/AC output current /AC output power/AC Energy yield/Inner Temperature/Heat sink Temperature /Status message/ Error message
LED
RED
 On: Ground fault or DC input insulation fault
Yellow
 On: Unit Error or Alarm
Green
 Flash: Standby or Sleeping mode
On: Normal Operation
Key Pad
UP key/ Down key/ Function key/ Enter key
Protection
  
Utility
Over/under Voltage, Over/under Frequency,
Ground fault, DC Isolation fault
Islanding operation detection
Passive : Voltage phase jump detection
Active : Reactive power control
Over Temperature
reduced output power
Certification
  
Safety
VDE 0126-1-1
EN62109-1
EMI/EMC
EN 61000-6-1, EN 61000-6-3, EN 61000-3-3