Product Name : PM-2230CR-LED
    Product Description

    Multiple Microprocessor design base 
    Detachable control panel with LCD 
    Unity input power factor and wide input range 
    Robust design with output transformer 
    True sine-wave double conversion on-line UPS 
    DC start and automatic self-diagnostic function 
    Capacity of battery unlimited and alarm silent 
    RS232 communication port and built-in SNMP slot 
    High efficiency design to save electricity 
    Low heat dissipation in long term operation 
    Designed to operate under harsh environment 
    Enhanced protections against lighting surges, disturbances etc.. 


    The Ultimate On-Line Power Protection. 


    CAPACITY Capacity 3KVA / 2100W
    OUTPUT Voltage 115Vac +/- 2% (115V or 120V re-settable via LCD panel)             
    220Vac +/- 2% (230V or 240V re-settable via LCD panel)
    Frequency       Synchronized (Line mode), 50Hz or 60Hz +/-0.5% (Battery mode)
    Wave-form True Sine wave
    Distortion <4% (Full linear load)
    Capacity 105% - 150% for 30 sec.,>150% for 200ms
    Crest Ratio 3:1
    INPUT  Voltage 115Vac or 220Vac
    Voltage Range 115Vac: 80~143Vac (70% to 100% load), 70~143Vac (50% to 70% load), 60~143Vac (0% to 50% load)         220Vac: 160~300Vac (70% to 100% load), 140~300Vac (50% to 70%  load), 118~300Vac (0% to 50% load)
    Frequency 50Hz or 60Hz +/- 8%
    Power Factor > 0.95
    BATTERY Type Maintenance free sealed lead-acid battery
    Capacity 12V / 7Ah * 8pcs
    Charger (Option) Built-In 9A Charger
    Built-In Charger 1A
    Back-up (Full/Half load) >6min / 15min
    Recharger Time 5 hrs to 90% of full capacity after full load discharge
    BYPASS Automatic Overload and UPS failure
    By setting Voltage Range (115Vac): 115+/-20V (re-settable via LCD panel) Voltage Range (220Vac): 176V~256V+/-20% (re-settable via LCD panel)
    TRANSFER TIME Transfer Time 0 ms (2.5ms inverter to bypass)
    INDICATOR UPSERVER LCD model LCD: UPS status, I/P&O/P Voltage& Frequency, Load %, Battery voltage & %, Temperature, Model Spec., Event Log                          
    LED: Normal (Green), Warning (Yellow), Fault (Red)
    LED model Normal (Green), Bypass (Yellow), Battery Low (Yellow), Inverter (Green), Load% (5 LEDs), Battery % (5 LEDs), Fault (Red)
    REMOTE PANEL For (LED Series) Mini Detachable LCD Control with 6 feet wire (Option)
    AUDIBLE ALARM Battery Mode Beeping every 4 seconds (re-settable) and per second when battery low
    Overload Beeping twice per second
    Fault Beep Continuously
    OUTPUT Socket NEMA5-15R 5*6pcs or IEC320*3pcs
    COMMUNICATIONS RS-232 Interface UPSilon 2000 monitoring software
    SNMP Intelligent Slot For Net Agent II (Option) with SNMP manager and Web browser
    NETWORK Surge Protection RJ45 I/O port available for 10 base-T network or Fax / Modem
    ENVIRONMENT Temperature 0-40 degree C; 32-104 degree F
    Humidity 0-95% non-condensing
    Acoustic Noise Less than 45dBA (at 1 meter)
    Net Weight w/o battery 10.5kgs
    w/ battery N/A
    Dimension (WxHxD) mm Rack Case (2U) 440 x 88 x 465