HOME > Products > Solar & Wind > SI Series 1500W~6000W > PM-3000SI





Front Panel
Back Panel
Accessory
Remote Control
Character:
 General
More inverters stackable
3 Phase connectable
Uninterrupted AC power (UPS function)
Power Control - Dealing with limited generator or shore side power
Power Assist - Boosting the capacity of shore or generator power
LCD display for parameter setting and error messages
Programming auxiliary relay (x 3)

Battery Charger
Adaptive 4-stage charge characteristic: Bulk-Absorption-Float-Equalize
The right amount of charge: Variable Absorption Time
Preventing damage due to excessive gassing: The Battery Safe Mode
Less maintenance and aging when the battery is not in use: The Equalize Mode
2 outputs to charge 2 battery banks
To increase battery life: Temperature Compensation
Battery Voltage Sense
Extensional Solar Charger Capacity expansion by max. 10 sets of solar chargers (Our Premium Series)

Description:
 Stackable Inverter ~
Pure Sine Wave Inverter with AC Charger and Solar Charger (Option) + one more design [stackable function].
You may parallel SI Series, according to your requirement.
One unit is about 1.5K, if you want to increase to 4.5K, you just need to parallel 3pcs SI Series.
Connect directly with Solar system.
Natural Power System, Energy recycle for solar, Future trend.

Specifications:

 MODEL

PM-3000SI-12 (12 Volt)
PM-3000SI-24 (24 Volt)
PM-3000SI-48 (48 Volt)

 INVERTER

 Input Voltage Range (VDC)

9.5~16VDC / 19~32VDC / 38~64VDC

 Output Voltage (VAC)

 90~120VAC / 185~240VAC

 Output Frequency

50Hz / 60Hz ± 0.1%

 Output Voltage

Pure sinewave

 THD

< 5%

 Power Factor

All loads

 Switch-on Behavior

Nominal output voltage within 20 msec.

 Cont. Output Power at 25°C(W) (cos£c=1.0)

3000W

 Cont. Output Power at 40°C(W) (cos£c=1.0)

2400W

 Maximum Power (W)

6000W

 Maximum Efficiency (%)

90 / 92 / 94

 Zero-load Power (W)

18W

 CHARGER

 Input Voltage Range (VAC)

100~125VAC / 200~250VAC

 Input Frequency

45~55Hz / 55~65Hz

 Power Factor

1

 Charge Characteristic

4-stage adaptive

 Maximum DC Voltage Ripple (Vrms)

< 1.25 V

 Charge Voltage "Absorption" (VDC)

14.4V / 28.8V / 57.6V

 Charge Voltage "Float" (VDC)

13.8V / 27.6V / 55.2V

 Output Charge Voltage (VDC) Min.,Max.

8V,16V / 11V,32V / 22V,64V

 Charge Current House Battery (A)

40A / 70A / 120A

 Charge Current Starter Battery (A)

4A

 AC INPUT SWITCH

 Protected by Thermal Circuit Breaker

30A

 Switch-over Time Inverter to AC Input

0 msec.

 Switch-over Time AC Input to Inverter 

0 msec.

 Detection Time AC Input Fault

4 msec. to 20 msec.

 Trip Level Mains to Inverter

90VAC / 180VAC

 Trip Level Inverter to Mains

94VAC / 187VAC

 Min.- Max. Frequency Range (50Hz/60Hz)

45~55Hz or 55~65Hz

 GENERAL

 Power Control

Yes

 Power Assist

20A

 Auto Transfer Switch (A)

30A

 Multi-purpose Relay

3 relays

 Protection

Output short circuit,
Overload,
  Battery overvoltage,
Battery undervoltage,
Battery reverse polarity detection,
Over temperature,
High input voltage ripple

 Common Characteristics

Operating temperature range: -20°C to +50°C
(fan assisted cooling) Humidity: max 95% (non condensing)

 Weight (kg)

28kgs

 Dimensions (L x W x H) mm

550 x 285 x 185 mm

 OPTIONS

 Solar Charger

SCC Series PM-SCC-45A-1248 / PM-SCC-60A-1248
(Max. 10 sets for parallel connection)

 Remote Controller

 Remote monitoring available, optional cables: 3M/15M

 Battery Temperature Sensor (BTS)

Compensation for the battery charging voltage and current