HOME > Products > Solar & Wind > GT Series 2000W~5000W > PM-5000GT


User Manual Certificate


Back Panel
Under Panel
Vertical View

Character:
Two built-in Independent MPPT Boosters increase overall efficiency
Convectional Cooling System provided to guarantee quiet operation
Compact Size, Light Weight
Up to 95% high conversion efficiency
Advanced DSP Control Technology delivers accurate data
Ease of Installation to Save Time and Money
Mimic LCD Display
IP65 Cabinets for both Indoor and Outdoor Applications
Optional Monitoring Software provided to offer operational status and electricity generated data

Description:
 The GT series grid-connected Photovoltaic Inverter is delivered in a waterproof IP65 enclosure which can be installed in either a grid connected solar tracker system or a stationary PV system. By taking care of an accurate power conversion from solar panel to local grid, the GT series effects conversion process with minimal power loss and maximum reliability.

Specifications:
Model
Item
PM-5000GT
Inverter
Technology
Conversion Mode
Sine-wave, Current source, High frequency PWM
Isolation Method
Transformer-less Design *
DC Input Data
 
Nominal DC Voltage
360 VDC
Max. DC input Voltage
500 VDC
Working range
120VDC~500VDC **
Max DC input current
(Each MPPT Tracker)
17.65 Amp
MPPT Range
150 VDC ~ 450 VDC
MPPT Tracker
2
AC Output Data
 
Nominal AC Power
5000
Max. AC Power
5300
Nominal AC Voltage
AC 230V
Output Connect Method
1-Phase / 2-Wires(L, N, G) or 1-Phase / 3-Wires(L1, L2, G)
AC Voltage Rang
184~264.5Vac(Base on 230 Vac)
Nominal AC Current
21.7Amp
Frequency
50/60Hz Auto-Selection (47.5 ~ 50.2 Hz or 59.3 ~ 60.5 Hz)
Power Factor
>0.99 with nominal AC current
Current Distortion
Total Harmonic current : Less than 5%
Single Harmonic current : Less than 3%
Efficiency Data
 
Max. efficiency
>96%
Euro efficiency
>94%
CEC efficiency
>94%
Environmental
 
Operating Temperature
-25 °C ~ + 50 °C
-13 °F ~ 122 °F
Humidity
0 to 90%(Without condensation)
Altitude
0 ~ 2000 M / 0 ~ 6600 ft
Mechanical
 
Dimensions
(H x W x D in mm )
455 x 510 x 170
Weight (Kgs / Lbs)
28 / 62
Protection Class
IP65, outdoor
Cooling
Free Convection
AC Connector
Terminal
DC Connector
Multi-Contact
Communication
 
Communication Interface
RS232
USB, RS485, Dry contact, TCP/IP
Front Panel
  
LCD
Boost input Voltage/Boost input Current/Boost input Power/AC output Voltage /AC output frequency/AC output current /AC output power/AC Energy yield/Inner Temperature/Heat sink Temperature /Status message/ Error message
LED
Leakage current fault or DC input isolation fault
Spec. of Utility is not matches with the Utility specifications of the inverter
Solar Cell power is greater or smaller than sleep power
Key Pad
UP key/ Down key/ Function key/ Enter key
Protection
 
Utility
Over/under Voltage, Over/under Frequency,
Ground fault, DC Isolation fault
Islanding operation detection
Passive : Voltage phase jump detection
Active : Reactive power control
Over Temperature
reduced output power
Certification
  
Safety
VDE 0126-1-1, EN50178, IEC62103
UL1741, IEEE1547
EMI/EMC
EN 6 1000-6-1, EN 6 1000-6-2, EN 6 1000-6-3, EN 6 1000-6-4