HOME > Products > Inverter & Charger > L Series Low Freq. 150W~6000W Sine Wave Power Inverters > PM-6000L

Front Panel
Back Panel
DC Cable
Remote Control
Character:
Microprocessor based design
Green power function
Remote control interface
Heat-Sink built in internal
Soft Start
AVR design
Input & Output isolated
Auto temperature control fan
Reverse polarity protection / by fuse / diodes /
Output short circuit protection
Temperature protection: 50 +/- 5degrees
Overload protection
Input low voltage protection
Input high voltage protection
Low battery alarm
Low battery shut-down

Description:
PURE SINE WAVE Inverters
It is appropriate for the motor, fan, pump and inductive loads.
Motor makes noise with modified sine wave but pure sine wave is fine to work.


Specifications:
Model No.
PM-6000L-24
PM-6000L-48
Output power continuous
6000W
Max. Surge power
12000W
AC Output Voltage

100V ~ 120Vac + 1~2% or 200V ~ 240Vac + 1~2%,
Adjustable by front panel

Output Voltage Regulation

-1.5% ~ +1.0%

DC Input Voltage
24VDC (20~32VDC)
48VDC (42~62VDC)
Efficiency
>80%
Distortion (THD)
<2%
Output frequency
50Hz or 60Hz + 0.5%
No Load Current
<4W
Input Low & high Voltage Prot.
Yes
Input & Output Short Circuit Prot.
Yes
Overload & shut-down
Yes
Temperature control fan
Yes
Over temperature shut-down
Yes
Soft Start
Yes

Reverse Polarity Protection

Yes (By Fuse)

Green Power Function
Yes (by front panel)

Green Power Recovery Time

1 Second

LED Status Indication

Power ON/ OFF, RUN / STAND BY, High / Low Battery Shutdown, Over Temperature, Shutdown, and Over Load Shutdown

Operation Temperature Range

0°C ~ 50°C  (32°F ~ 122°F)

Storage Temperature Range

-30°C ~ 70°C  (-22°F ~ 158°F)

Remote Control Interface
Yes
Accessory
DC cable with O-ring
Dimensions (L x W x H mm)
430 × 318 × 242
Gross weight (by Kg/s)
38.5kgs
Output Waveform
(Pure sine wave)