| MODEL |
PM-6006MS-LED |
PM-6006MS-LCD |
| CAPACITY |
Capacity |
6KVA / 4200W |
| INPUT |
Nominal Voltage |
1P2W 220Vac |
| Voltage Range |
176~276Vac +/- 3Vac |
| Frequency |
50Hz or 60Hz +/- 8% |
| Power Factor |
>= 0.98 |
| OUTPUT |
Voltage |
220Vac +/- 1% (230V or 240V re-settable via LCD panel) |
| Frequency |
50Hz or 60Hz +/- 8% Synchronized (Line Mode)
50Hz or 60Hz +/-0.5% (Battery Mode) |
| Wave-form |
True Sine wave |
| Distortion (Tower) |
=<2% THD (Linear Load), =<6% THD (Non-Linear Load) |
| Distortion (Rack) |
<4% THD (Linear Load), <7% THD (Non-Linear Load) |
| Crest Ratio |
3:1 |
| BATTERY |
Type |
Maintenance free sealed lead-acid battery |
| Capacity |
12V / 7Ah * 20pcs |
| Charger (Option) |
Built-In 4.2A Charger |
| Built-In Charger |
2A |
| Back-up (Full/Half load) |
8 min. |
| BYPASS |
Automatic |
Overload and UPS failure |
| Transfer Time |
0 ms( AC to DC & Inverter to Bypass) |
| INDICATOR UPSERVER (LCD Series) |
LCD |
UPS status, I/P&O/P Voltage& Frequency, Load %,Battery Voltage, Temperature, Event Log |
| LED |
Normal (Green), Warning (Yellow), Fault (Red) |
| Display (LED Series) |
LED |
AC input (Green), Bypass (Yellow), Battery Low (Yellow), Inverter (Green), Load% (5 LEDs), Battery % (5 LEDs), Fault (Red) |
| AUDIBLE ALARM |
Battery Mode |
Beeping every 4 seconds |
| Battery Low |
Beeping every seconds |
| Overload |
Beeping twice per second |
| Fault |
Beeping Continuously |
| INTERFACE |
RS-232 Interface |
UPSilon 2000 monitoring software |
| SNMP |
For Net Agent II (Option) with SNMP manager and Web browser |
| NETWORK |
Surge Protection |
RJ45 I/O port available for 10 base-T network or Fax / Modem |
| ENVIRONMENT |
Temperature |
0-40 degree C; 32-104 degree F |
| Humidity |
20-90% non-condensing |
| Acoustic Noise |
Less than 55dBA (at 1 meter) |
| NET WEIGHT |
w/o battery |
90kgs |
| w/ battery |
18.3kgs |
| Dimension (WxHxD) mm |
Tower Case |
260 x 717 x 570 |
| Rack Case (2U) |
482.6 x 132 x 600 |
