HOME > Products > Solar & Wind > SLU Series 800W~8000W > PM-8000SLU

 



Front Panel
Back Panel
LCD Display
Character:
Build in Solar charger controller
LCD display
Microprocessor based design
Heat-Sink built in internal
Soft Start
AVR design
Input & Output isolated
Auto temperature control fan
Reverse polarity protection. / by fuse / diodes /
Output short circuit protection
Temperature protection
Overload protection
Input low voltage protection
Input high voltage protection
Low battery alarm
Low battery shut-down

Description:
PURE SINE WAVE Inverters with LCD Display
It is appropriate for the motor, fan, pump and inductive loads.
Motor makes noise with modified sine wave but pure sine wave is fine to work.

Specifications:
  Model No.
PM-8000SLU-48
  Output Power Continuous
8000W
  Max. Surge Power
16000W
1. Input Section
  Input Nominal Voltage
220/230/240Vac
  Input Voltage Range
120V~280Vac
  Line Low Transfer
120Vac +/- 2%
  Line Low Return
130Vac +/- 2%
  Line High Transfer
280Vac +/- 2%
  Line High Return
260Vac +/- 2%
  Input Frequency
50Hz or 60Hz (45Hz~75Hz)
2. Output Section
  Output Voltage
200 / 220 / 230 / 240Vac re-settable via LCD panel
  Waveform
Pure Sine Wave
  Voltage Regulation (Batt. Mode)
< 3% RMS for entire battery voltage range
  Output Frequency
50Hz or 60Hz
  Total Harmonic Distortion Output
  THD
< 3%
  Maximum Load
Up to short circuit
  Asymmetrical Load Max.
Up to nominal output power
  Overload and Short Circuit
  Protection
Automatic disconnection
  Overheating Temperature Protection
Acoustic warning before shut-off. Automatic restart
  Power Factor
1.0
  LCD Display
UPS status, I/P&O/P Voltage Frequency, Load%,Battery Voltage & %, Temperature, Model
  LED Display
Normal (Green), Warning (Yellow), Fault (Red)
  Maximum Efficiency
> 80%
3. Battery Section
  Voltage Range
48VDC
  Backup Time (at full load)
Long time available
  Input Frequency Range
45~70Hz
  Max. Charging Current
  (3 steps selectable)
60/80/100Amp
4. Solar Charge Regulator-Floating
  Battery Voltage
48V
  Charging Voltage
55.2V
  Solar Max. Peak Voltage
100V
  Solar Charging Working Voltage
44.0V
  Max. Charging Current
50A
5. Audible Alarm
  Battery Mode
Beeping every 4 seconds
  Low Battery
Beeping every second
  Solar Inverter Fault
Beeping continuously
  Overload
Beeping twice per second
  Temperature Compensation (Option)
3mV / °C cell
6. General date
  AC By Pass Time (UPS Mode)
<10ms max
  Operation Temperature
-20 °C to +55 °C
  Audible Noise
Less than 55dBA (at 1M)
  Relative Humidity
0-95% non-condensing
  Accessory
DC cable (option)
  Dimensions (L x W x H mm)
600*415*260
  Net Weight (by Kg/s)
55