| MODEL |
PM-8020SS-LED |
| CAPACITY |
Capacity |
20KVA / 14000W |
| INPUT |
Nominal Voltage |
3P4W 380Vac |
| Voltage Range |
304~478Vac +/- 3Vac |
| Frequency |
50Hz or 60Hz +/- 8% |
| Power Factor |
>= 0.95 |
| OUTPUT |
Voltage |
220Vac +/- 1% (230V or 240V re-settable via LCD panel) |
| Frequency |
50Hz or 60Hz +/- 8% Synchronized (Line Mode) 50Hz or 60Hz +/-0.5% (Battery Mode) |
| Wave-form |
True Sine wave |
| Distortion (Tower) |
=<2% THD (Linear Load), =<6% THD (Non-Linear Load) |
| Distortion (Rack) |
N/A |
| Crest Ratio |
3:1 |
| BATTERY |
Type |
Maintenance free sealed lead-acid battery |
| Capacity |
N/A |
| Charger (Option) |
N/A |
| Built-In Charger |
4.2A |
| Back-up (Full/Half load) |
Depending on the capacity of external batteries |
| BYPASS |
Automatic |
Overload and UPS failure |
| Transfer Time |
0 ms( AC to DC & Inverter to Bypass) |
| Display (LED Series) |
LED |
AC input (Green), Bypass (Yellow), Battery Low (Yellow), Inverter (Green), Load% (5 LEDs), Battery % (5 LEDs), Fault (Red) |
| AUDIBLE ALARM |
Battery Mode |
Beeping every 4 seconds |
| Battery Low |
Beeping every seconds |
| Overload |
Beeping twice per second |
| Fault |
Beeping Continuously |
| INTERFACE |
RS-232 Interface |
UPSilon 2000 monitoring software |
| SNMP |
For Net Agent II (Option) with SNMP manager and Web browser |
| NETWORK |
Surge Protection |
RJ45 I/O port available for 10 base-T network or Fax / Modem |
| ENVIRONMENT |
Temperature |
0-40 degree C; 32-104 degree F |
| Humidity |
20-90% non-condensing |
| Acoustic Noise |
Less than 60dBA (at 1 meter) |
| NET WEIGHT |
w/o battery |
55kgs |
| w/ battery |
N/A |
| Dimension (WxHxD) mm |
Tower Case |
260 x 717 x 570 |
| Rack Case (2U) |
N/A |
