HOME > Products > Solar & Wind > Premium MPPT Series > PM-SCC-80AMW



Front Panel
Back Panel
 
 

Character:
Battery charge management, state of charge information.
Built-in Battery Energy Monitor tracks Power production and consumption to calculate the energy remaining in battery state of charge (SOC) is displayed in percent full, Amp-hours, Watt-hours, and 90days of energy-harvest history is stored in the solar charger.
Continuous output Power Rating without de-rating at up to 50°C ambient temperature.
Supports Flooded Lead Acid (FLA), GEL, and Absorbed Glass Mat (AGM) batteries, 2/3/4 Stage charging with adjustable set point.
Wire the PV modules in series up to 192VDC normal (240VDC Max).
Built-in temperature compensation function for safe and complete charging.

Description:
Optimal Solar Maximum Power Point Tracking
Wind & Solar Charge Controller
Can be paralleled (Max. 16 sets) at will, according to your demand.

Specifications:
  Model No.

PM-SCC-80AMW

  Maximum output current
(Continuous at up 50°C ambient temperature)

80 Amps

  Battery Voltages

12,24,36,48 VDC Normal

  Max PV Input Current

70 Amps

  Input Voltage Range

16~192VDC Operating

240VDC Maximum Open Circuit Voltage

  Max PV Array Power

5200 Watts
(Maximum when equalizing a 48V battery to 64V at 80 Amps)

  Charge Regulation Modes

Bulk, Absorption, Float, Auto/ Manual Equalization

  Battery Temperature Compensation

5.0 mV per°C, per 2 volt cell

  DC to DC Conversion Capability

12V Battery: 16~192VDC

24V Battery: 32~192VDC

36V Battery: 48~192VDC

48V Battery: 64~192VDC

  Display Status

Built-in 2-line, 20-character LCD with backlight
LCD status screen displays input voltage and current, output voltage and current, charge-mode, Battery SOC

  Data Logging

Logs energy harvested for 90 days, LCD displays WH, KWH, AH

  Energy Monitor

LCD shows SOC, AH, WH, and present charge or discharge current. A 50mV/ 500Amp shunt is required to use

  Auxiliary Relays

Two independent relays with from A (SPST) contacts for control of external devices. Contact rating is 3 Amps, 50VDC

  Operation Temperature

Full Power Output to +50°C ambient

  Standby Power

< 4 Watts

  Dimension

414.8 x 225 x 147 mm

  Weight

7.1 Kgs