Description:
Remote control box with 3M wire.
You can control everything on the remote contronl.
Specifications:
LED Indicators
LED | Name | LED ON | LED OFF |
1 | AC IN | 1. Input voltage normal, and position > “transfer Voltage Level” (150VAC~240VAC) 2. Input voltage frequency range in between (45~65Hz) |
No input power |
2 | AC CHARGER | Green : Battery charger is working. | |
3 | AC OUT | There is voltage at the ¡§AC OUT¡¨ terminal. | |
4 | INVERTER | Green : Inverter is working. | |
5 | BATTERY | FLOAT or ABSOR. Or BULK charge state of battery. | |
6 | ATS | Green : ATS switch is active AC IN voltage is being sent directly to AC OUT terminal | |
7 | RUN/STOP | Green : SSL series turn on. Red : SSL series turn off. |
|
NOTE: Green Blink : Auto-Restart is in use | |||
8 | COM./ERR. | Remote control port in communication/in error |
Push Buttons
Push Buttons | Name | Description | |
PB1 | RUN/STOP | SSL series RUN/STOP key | |
PB2 | DSPL | Multi-display select key | |
PB3 | ENTER | Data write-in key | |
PB4 | DOWN (∇) | ∇ Decrement key | |
PB5 | UP (Δ) | Δ Increment key | |
PB6 | ![]() |
AC Input power to charge the battery. Function Key to move Cursor to the right digit at Parameter Edit. |
Before changing from one mode to another, it has to stop running and be in STOP mode. |
PB7 | ![]() |
DC power from battery to supply to AC loads. Function Key to move Cursor to the left digit at Parameter Edit. |
|
PB8 | ![]() |
AC Generator Support with Dynamic Power Shifting. Function Key to return to Main Menu ¡§Programming¡¨ |
|
PB9 | ![]() |
AC Power as Priority Support. Function Key to return to Main Menu “Operation”. |