Battery charge management; state of charge information.
Built-in Battery Energy Monitor tracks Power production and consumption to calculate the energy remaining in battery state of charge (SOC) is displayed in percent full; Amp-hours; Watt-hours; and 90days of energy-harvest history is stored in the solar charger.
Continuous output Power Rating without de-rating at up to 50°C ambient temperature.
Supports Flooded Lead Acid (FLA); GEL; and Absorbed Glass Mat (AGM) batteries; 2/3/4 Stage charging with adjustable set point.
Wire the PV modules in series up to 112VDC normal (140VDC Max).
Built-in temperature compensation function for safe and complete charging.
Optimal Solar Maximum Power Point Tracking
Solar Charge Controller
Can be paralleled (Max. 16 sets) at will; according to your demand.
| Maximum output current
(Continuous at up 50°C ambient temperature)
|Battery Voltages||12;24;36;48 VDC Normal|
|Max PV Input Current||70 Amps|
|Input Voltage Range||16~112VDC Operating|
|140VDC Maximum Open Circuit Voltage|
|Max PV Array Power||5200 Watts
(Maximum when equalizing a 48V battery to 64V at 80 Amps)
|Charge Regulation Modes||Bulk; Absorption; Float; Auto/ Manual Equalization|
|Battery Temperature Compensation||5.0 mV per°C; per 2 volt cell|
|DC to DC Conversion Capability||12V Battery: 16~112VDC|
|24V Battery: 32~112VDC|
|36V Battery: 48~112VDC|
|48V Battery: 64~112VDC|
|Display Status||Built-in 2-line; 20-character LCD with backlight
LCD status screen displays input voltage and current; output voltage and current; charge-mode; Battery SOC
|Data Logging||Logs energy harvested for 90 days; LCD displays WH; KWH; AH|
|Energy Monitor||LCD shows SOC; AH; WH; and present charge or discharge current. A 50mV/ 500Amp shunt is required to use|
|Auxiliary Relays||Two independent relays with from A (SPST) contacts for control of external devices. Contact rating is 3 Amps; 50VDC|
|Operation Temperature||Full Power Output to +50°C ambient|
|Standby Power||< 2 Watts|
|Dimension||414.8 x 225 x 147 mm|